I have surplus/military bare cables dating from the 1970s or so, extra shiny silver plated copper with PTFE jacket: a joy to solder, then more "normal" ones from the late 80s and 90s, then "old" modern ones, that is, power/audio/data cables usable with recent stuff. I'll never throw away any of them because unlike most crap they bundle with consumer devices today, they're made of real copper. Take a cheap cable bought today and chances are that it either sticks to a magnet, meaning it's copper plated steel or other crappy alloy, or it doesn't and it's super light which indicates it's made of aluminium; in all cases not good where power dissipation can be a problem or where resoldering may be necessary. Keep old cables!
Key for me is to "group" cables. For example, I have a bag of USB-C cables, a bag of USB-A cables, etc.
Grouping them is key to deduplicating.
It's easy to look at a single legacy USB A-to-B "printer" cable in isolation and think "I might need this someday!" Because you really might need it someday. However, if you group them you might see that you have ten of them. And then you can get rid of... maybe 8 of them.
I also (mostly) put individual cables into baggies. You can get clear 2mil generic ziploc style baggies for super cheap on Amazon or elsewhere. $15 for 200 or something. Prvents tangles and way less effort than wrapping or tying them.
Remember CD spindles? Those are were a quarter of my cables live now. They can be stacked! There's also a few boxes and one tech bag. Also, the 15m (50ft) HDMI cable doesn't fit anywhere so it got it's own space.
Ha! I use CD spindles for… wait for it… CDs! Just opened the second drawer of my desk and counted four spindles of blank CDs and DVDs that I haven't used in years.
(I also hoard blank CD/DVD jewel cases. Who says technology ruins lives?)
I use twine for the same reason. Dirt cheap. Lasts forever. Doesn't leave residue on your cables. The downside is I end up cutting the twine when I need to use the cable but a couple inches of twine in insignificant.
I routinely steal my wife's hairbands to tie various cables in my cable stash. You can never have enough USB cables of various types. But as Murphy dictates, the USB cable that I need now is one that I don't have in my stash.
This bags or bins or whatever your preferred organization method is. Don't just have "cables" group them. This is how I discovered "yeah, I don't need all these DVI/VGA cables and I can do with only 10 extra HDMI cables".
I'll second "grouping" with "capability sorting". Get a cable tester and sort your cables by Charge/USB speeds. Even with my default "grouping" of things like "USB-C -> C", "USB-A -> C", etc I still was buying new cables for projects/uses since I wanted to make sure I got exactly the speed/power requirements right. Now all my cables are sorted by capability and that led to more purging and less purchasing since I can go to my cable bins and grab exactly what I need.
That sounds hard. Is a USB-A-to-C cable in the A group or C group or neither? What about the inverse? What about cables that only do data but can't transmit enough power? What about cables that are slow but high power? What about thick cables like USB4 that barely bend or fit in the bag? What about male-to-female vs. male-to-male? What about brand-specific cables that have their own abilities (say, high-powered but not PD)? The list goes on and on...
I think I hardly have any pairs of cables that are similar enough to be interchangeable, and at this point most of them are USB-C, so they'd all mostly end up in the same bag if that's the criterion.
It's not for everybody (what ever is, rite?) and since you "hardly have any pairs of cables that are similar enough to be interchangeable" then congrats, you're winning at life and don't need anything like this.
The sounds hard
Doesn't feel hard to me. I have a bag for USB A, a bag for USB C, and a bag for USB A<->C.
My USB-C charging cables are all 3' or longer, so they're visually distinct from the crappy little cables that come for free inside the package for various budget-priced gizmos.
My Thunderbolt/USB4 cables are labeled as such, and I am very confused that you are talking about Thunderbolt/USB4 cables so stiff that they cannot bend to fit into a container or bag.... I mean, mine are stiff but not that stiff. Plus these are expensive cables. Not sure I have any spares. Those are bought for purpose.
Definitely not winning at life with this lol, it's actually frustrating because the cables are so similar. One has a higher speed, one has a higher power, one is shorter, one is longer, one is more flexible, one has a display showing when it's connected, etc... and in many cases it's hard to tell which at a glance so it's always a pain trying to figure out if I'm using a cable unnecessarily somewhere and unnecessarily buying another one because of that.
Charging is an interesting case, I actually deliberately use crappy cables for that too, depending on the charging time I need!
Re: stiffness: I mean I guess it depends, how big is your bag. I'm thinking like a freezer bag not a grocery bag. I could bend them to fit but then I'd probably mess them up.
My solution is a big drawer block with lots of spots for different cables. USB c cables with video go in the video cable drawer, high power goes in the power drawer, etc. Can't mistake USB c with HDMI (and mini HDMI can burn in hell). And only buy USB C cables that state their capabilities on the housing, if they don't I'll permanently attach them to a place where they can be most useful.
> Ziptie once coiled, attach label for what format / length.
Please god, no more zip ties. Use double sided Velcro strap. You can buy it in a roll and cut to length. Reuse it all you want. Join multiple shorter lengths to make a longer one. Just please don't make me cut another god damn zip tie off a bundled cord. I deal with enough zip tie bondage fetishists at work.
+1000 did _exactly_ this right down to the ziploc. Also a bag for audio, HDMI, old apple cables, and "random" cables. These days, I store the ziplocs in a pelican-type case and that goes in a stack with cases for power cords, camera gear, SBC gear,etc - and the stacks all go on furniture dollies, so I can roll them out.
I do this. All my FireWire 400-to-800, 400-to-400, 400-to-dinky little Sony 400, etc. cables were all in one box, the FireWire 800-to-Thunderbolt adapter was in the box with my Thunderbolt cables and adapters, and I still didn't find the FireWire 800-to-800 cable I needed to use Target Disk Mode on a friend's Mac a few months ago until a few weeks later when I was cleaning out my storage unit and found an unused FW800 cable in a box I guess I was saving on the off chance that I needed to return a 15-year-old LaCie RAID enclosure that was shucked about a decade ago off for warranty repairs.
Yeah, this is pretty much what I was going to write. I group my cables into boxes for USB, power, network, audio/video, and power supplies. The boxes are a finite size, and when no more cables will fit into the box, I go through and do some deduplication.
Yes grouping is the important part. The next important part is labeling.
For example, I have a variety of USB C to USB C cables but they each have their own capabilities. Some support high transfer speeds, so I keep them around for connecting SSDs, while others are just USB 2 speeds so they are strictly for charging.
Another case is I have a very specific USB C to USB C cable that looks incredibly generic, but it is for connecting a screen tablet to a laptop because the manufacturer decided to make the port recessed, so only their cable fits. If this cable wasn't labeled as for a specific device, I would have donated it years ago.
It is some effort, for those who don't like to tinker with tech I can understand why they just shove them all into a box in the back of their closet. But I find that culling my cables at least makes me aware of what I have and don't have.
One other suggestion I have is just buying a longer cable than you think you need because eventually you'll have the need for it anyway. I have so many 3.5mm aux cables because I kept changing my desk set up and needing to buy longer and longer cables. If I had just bought the longest cable I could have at the time I would have saved myself some headache.
Another tip is adapters. Sometimes it's easier to just have cables of one type and a bunch of adapters for when you need them rather than having a ton of different cables for each possible scenario. I used to have a mix of RCA and 3.5mm cables but never had the right combination of what I needed at the time. Eventually I caved in and just bought a ton of adapters so I could standardize all the cables and use adapters as needed. Same with USB C cables.
I'll pay the price to sound like your average redditor but... thanks, Internet stranger, for this advice. I will follow it from now on - especially for the "prevent tangles" part.
I grouped mine a few months ago. Since then, several times, I've been able to find a cable and use it right away. Before that the prospect of digging through the massive tangle often led me to (lazy!) order new cables.
> USB B cables are also notoriously sensitive and the slightest damage can result in malfunctions. Went through this recently with a PreSonus AudioBox.
Do you mean micro-USB-B? Full size (and mini) USB-B cables (comparatively) built like tanks.
Even though it's annoying, I understand the design tradeoff. You definitely would rather your (replaceable) cable get damaged than the port it's plugged into.
I have this issue with cables between my Pi 4B and my slightly old 3D printer.
USB-A to micro-B cables, and the connection is tetchy beyond belief about which ones it will accept and which it won't, either with or without the theoretically-unnecessary-for-this-printer power wire blocker. I can see no rhyme or reason to it but now I have a cable that has a dot painted on it...
Do not do this. All plastic baggies, storage tubs, and grocery bags, are going to build up with static electricity. While it may seem totally fine to drop inert cables into a plastic bag, eventually you'll come up against a USB stick, or an SSD or SDRAM, or something, and that ESD damage will not be a pleasant customer experience.
I picked up some resealable, aluminized bags and they've lasted for years. I also purchased fistfuls of silica gel packets, and I toss one into each bag when I seal it up.
I'm not sure if organizing "by cable type" would make sense to me, when there are adapters and dongles involved. Some of these baggies have been labeled by the central device, e.g. "All ThinkPad accessories are in here".
You can just cut these to the desired length and wrap them around your cables, for routing or bundling. They are, of course, reusable. I cut little notches in them so that they stay locked to each cable. You could get them in rainbow colors, but I like the white rolls so that I can write on them with a Sharpie.
Hmm, interesting. I've never had a static charge issue, but then again, maybe I will someday. I'll definitely look into that next time I mess around with my storage. Thank you.
Yeah, "grouping" is largely the way to go for the generic parts, and keeping parts together when they really do need to go together is another.
I used to just have a generic big tub with all the generic cables and wires. Some were nicely wrapped up, others often got themselves into a giant tangled mess. I could never find anything. I got a bunch of small/medium sized plastic bins with lids for all the generic stuff. An old labeler quickly made them "USB cables", "A/V Cables", "DC Power Adapters", "AC Power Cables", "Coax Cables"...now it takes me two seconds to find any particular random cable.
Recently, I was screwed by my big box of cables, when I pulled out a SATA power connector for my modular power supply, and learned very quickly that though the ports universally fit across modular PSUs, the pinouts are not actually intercompatible, and you can and will fry your hard drives.
I didn't know this; I had foolishly assumed that SATA power connectors were standardized on both ends.
Modular PSU cables never go in the big box. They go back in the PSU box if I'm being smart. Then I know which PSU they came from and can throw them out in ten years along with the PSU itself.
(I'm rarely smart and have a second big box of modular PSU cables that I maybe ought to get rid of.)
I too have been burned by the BBOC, although not as badly as this:
I picked out a random short ethernet cable that looked nice (it was flat) to connect my wifi AP to my router.
It took me about a month to realize my 100mbit internet connection had dropped down to about ~85-90mbit, but more importantly, transferring files between a wifi client and the wired network was also only ~90mbit.
Turned out the cable was so bad that it only connected at 100mbit...
I have now gone the other way and I actually curate the BBOC:
All cables I get for 'free' with random appliances now go straight to the bin (unless they are specialised) and I only keep cables I specifically bought and know they adhere to a standard.
They're standardized on the device side, but not the PSU side. So always check pinout before you make the very reasonable assumption that if it fits it works
A PSU cable tester is valuable for this. They're much cheaper than a replacement PSU, and you can plug in cables wherever they fit on a PSU, and test whether the output is correct for the CPU/PCI/motherboard/SATA connector you want to plug it into. The PSU and cable might be a black box, but the output is always testable.
That's an expensive mistake to make, though frying your HDDs is usually a lot cheaper than frying your GPU.
It's seriously annoying that this is the case though. Unless you kept the cables in the original package or in a labelled container, you cannot safely use them again if you owned more than one modular PSU.
It wasn't actually very expensive in money, because I was still able to RMA the pair of fried drives, but it did cost me $30 in shipping, a month of waiting, a lost delivery via UPS, and tons of time dealing with customer support for both UPS and Seagate to actually get a second set of replacement drives.
On the bright side, the actual replacements that eventually got to me were both 2TB bigger than the originals. They didn't tell me about this, so I'm not sure if they silently upgraded me to apologize for the wait, it was an accident, or they happened to be out of stock and just grabbed the next size up.
I hope you never have to work with serial D9 cables. The variation of pinouts for legacy equipment is massive! Pretty sure every theoretical variation became some standard.
I recently purged my cable box. I had 8 HDMI cables... 8. What do I need 8 HDMI cables for?
I tossed them in the garbage with a ton of other use less cables. I kept one HDMI cable (not 8) and a few odds and ends. I kept one rj45 Ethernet cable and tossed the rest. I even tossed my rj45 crimping tool kit. Why? Because I don't see the need to crimp Ethernet cables anytime soon and should the need arise I can buy a kit for $30.
So at the end my cable box when from being overflowing to half full.
I had four unused HDMI cables. One day, I needed to send a signal from my PC to my tv. I usually use Plex for convenience and the "resume where I left off" feature, but that day a certain update was acting up, so I decided to use a cable instead. Easy. The next day, I wanted to send a signal from my laptop to the tv downstairs (I still hadn't fixed the Plex issue) and pulled out the second cable because I needed a different length than the first one... but it turned out to be incompatible, so I ended up using the third one.
I also did the "only keep one of each" purge, but that last part about throwing away a tool because you can just buy another one later is nuts to me. Yeah you could do that. You could also throw away all your cables and just buy them when you need another lol.
HDMI and Ethernet are comedies at this point, no need to hoard so many. The point is to not throw away the more rare/niche ones since getting one after will be hard and/or expensive.
I use big drawers for "types" and ziplocks for within; i have a network drawer , a media one and a generic one that says "stuff that glues or grabs" (zip ties, tape, etc)
In 2021 I cut the end off a USB cable to expose the power leads which I scotch taped to the power meter on my bike to charge it. I kept that cable. In 2024 I used it to add USB disconnects to the light strip I attached to the bottom of my son's crib, allowing me to keep the light strip intact when we lowered the base from the baby height to the toddler height. A week later we got rid of the strip because we really didn't need the light like that any more. Still, no regrets. This was my version of using every part of the buffalo.
waiting for the next piece of this story, where your toddler turns 13 and gets their first mp3 player, which doesn't ship with a charger and guess who still has 18 inches of cable left?
I wish the old cables, gear, etc. I have squirreled-away stopped saving Customers' and friends' asses because I could feel good about getting rid of it.
We've been unspooling the stash of wood off-cuts, bits of copper pipe, and misc. broken or trash-picked parts from my late grandfather's workshop for the last few years. He always seemed to have materials at-hand to fix anything and, as a kid, I was in awe of that. Now I understand why.
I hope I can leave less stuff for my daughter to poke thru, but at the same time I want to be like my grandfather, seemingly being able to fix anything immediately.
My dad worked at Lockheed and in the 80s they joked they used JIC (just in case) manufacturing. They had so many parts without a clear reason as to why they created so many.
> I wish the old cables, gear, etc. I have squirreled-away stopped saving Customers' and friends' asses because I could feel good about getting rid of it.
What you've got to do is become more forgetful.
Ask not what a 17v power supply can do for your friends. Ask if you'll remember it and find it when that moment comes.
I put my cables in bags then in a box. I can't tell you how helpful the bags are. It only took me like an hour to sort the first time. But it's already saved me hours only a year later. Those 5 minutes of searching add up. Just fight the laziness and don't let entropy increase. It's *far* easier to stay organized than it is to organize
Funny this came up hn today. this week I did some organization of my cable boxes. I use banker boxes on a steel shelving unit. I put the cables and parts inappropriate boxes and labeled them and feel that my corner of the universe is a little bit better organized than before.
Mine is similar but I split audio and video since I have a lot of audio-specific stuff. "Video" only has the various monitor cable standards going back 20-odd years.
I think I've got the same three boxes. HDMI cables and adapters fall into the Venn diagram overlap of the last two IMO. You could also make a strong argument for USB also falling into "PC Accessories". But there's nothing quite as satisfying as having the _exactly right_ cable or adapter on hand to solve a problem. Makes it all worth it!
We have the same. Do you know why the ‘every audio connector known to man’ box contain every audio connector known to man but yet never a stereo 1/8” headphone-jack to headphone-jack cable?
My boxes been sorted by "what does the cable carry", one power cables, one data, one video, one patch cables, then some are split out, like sound production related cables, one with balanced 1/4", one unbalanced, one MIDI... I think in total 8 moving boxes by now.
My categories are identical to yours. Home Depot had a sale on these stackable dewalt boxes that are much more cost effective for semi-junk stuff than Milwaukee pack outs.
For real, I have like 200 kilos of cables. I could very likely reduce that down to something less severe, but that involves sorting and inventorying 200 kilos of cables.
Whoever does need it, I give you permission to throw out all your old cables, power adapters, and routers. Yes, on the off chance you do decide you need a Palm III dock, Linksys WRT54G, or Sony PSP charger that means you'd have to buy one on Ebay, but you can cross that $10 bridge if it actually happens.
No, this method does not work. I tried, got rid of all those stuff because why would I need it ever again. And of course a month later I needed that one stupid thing right there and then. And I remember throwing away... Not again, I keep at least one cable of each in a separate box to find immediately, the rest is stored, it is not asking for any money.
For me it's not the cost that bugs me when I don't have a part, but rather the disruption to my flow. If I can't get a project done all at once I'm much less likely to ever get it done.
And whoever needs something else, I give you permission to ignore this fool and keep your box(es) of cables. I don't regret a single thing about my ~8 boxes of cables.
Give them away to a thrift shop instead. Then you've helped somebody else who will find that cable in the thrift shop. So they can put it on ebay and sell it back to you when you need it two months later.
I will say that Vidmar, Lista, and Rousseau make thin drawer cabinets that work well for cables if you have graduated from "big box of cables" to "cabinets full of cables". Also, old map or blueprint drawers work well. Still requires obsessive coiling, but being able to see (semi-random access) all of them in a drawer all at once is a big speed improvement for searches.
I'm terrified of not being able to find old USB cables.
My D2A converter I use to route TV audio to a small amplifier died. It was cheap, but decent. I wanted another cheap one. I had trouble finding any. Finally, I snagged a pair on Amazon/eBay, but it used ancient USB connections. Luckily, I had old USB cables, so I'm good. But what will I do if the USB cable stops working?
There was also the Micro-A which I found on some dev boards. I think the Arduino Due (Arm Cortex M3 chip) used one for the USB host port as well as an Atmel Arm uc board.
Also that weird, really small USB connector that was found on some early digital cameras. I think Kodak was a big user of it. Sorta looked like a narrower and taller version of the Mini-B. Maybe the Mini-AB but that doesn't look like it. I have one in my box at home.
Since school started this year, I bought both my kids TI-84 plus CE calculators. Both were being sold cheap because “no charging cable” (uses a mini-B) while I had a dozen in a box.
I wish that happened a lot less as I have entirely too many old cables.
In my big box of cables I have, among other things, a double-ended USB-A cable. I understand that this is absolutely not standards compliant, and I have absolutely no idea of where I got it from. I have never used it. But it is a thing that exists.
Getting rid of almost 10 different proprietary charging cables for pre-smart phones and some old laptops felt great though :P
I had one of those to charge a bicycle headlight. I gave it away with the bicycle, but in the span of time I had it, one visiting guest borrowed it to recharge a portable generic USB battery pack. So there you go, two product categories known to use that sort of cable!
You and the other responders are probably familiar with it, but you made me look up this decent StackExchange answer again, coming from a search for "the forbidden usb cable" :)
I installed some HP slide-out rackmount keyboard/monitor units that used these as the host connection. This was back in the days when PS/2 was still around so they usually weren't used.
mine had 2 male USB ends on one side and 1 on the other. It was to power a laptop hard disk drive from USB if one port couldn't provide enough power. Feels illegal. I bought it off eBay with a money order in like 2003.
Clear Hefty Slider bags are perfect for this! I have my cable boxes (Hefty Hi-Rise) filled with these bags, USB -A to USB-C, USB -C to USB-C (then sub-bagged with 65w, 100w, 240w) and so on.
Point is, use clear bags so you can see inside, and Hefty makes the slider version. I get the gallon and half gallon bags for this, and then the quart size as well. This is the Marie Kondo technique and it's amazing for keeping all these cables which are always coming in handy!
I keep the duplicates, because you never know which color and length is going to be the perfect fit for the current need!
My cable box is my retirement fund. Copper prices are rising, and scrap-metal dealers pay pretty well for it.
But jokes aside: last year I also sorted some out and took 10 kilos of household cables to the local scrap-metal dealer here in Germany and got €30 for them. Better than throwing them away.
I have a rack of boxes of cables in my home, its not that out of the ordinary since I'm in the industry and am the network admin for my entire block in my housing community.
The other day I was fabberglased I could not find an HDMI to HDMI cable! HDMI > DVI yes, to VGA yes, to display port yes, to mini-HDMI yes. it was so shameful, for me having to go to amazon/best buy to purchase an HDMI cable is the lowest of the low.
I try to keep only 3 or 4 of the same cable, and if one gets damaged, I throw it away after the fourth or fifth time I look at it and wonder if I can fix it.
My dad passed a few years back, this past year I spent a considerable amount of time helping my mom and sister tame all his junk. So much junk was tossed or donated, very little was kept and even less sold. Not wanting to burden my family with all of my junk I started working on my own hoard this summer. Letting go wasn't easy, but once it was done I felt less burdened by it.
And yes like clockwork a week after tossing it all I needed some random cable. I spent a couple of bucks for one at Walmart of all places, but Amazon and ebay would have had my back if that cable hadn't been there.
If you have a similar junk box, you have my permission to just throw it away. Don't look in it, don't worry about it, just toss it. You do not need to be carrying so much junk. You do not need 20 year old ethernet cables, 30 year old scsi and ide cables, or 40 year old audio cables. You can buy new ones, in new condition today, most of which are reasonably priced and wont produce random errors or noise due to internal faults.
tl;dr- You don't need it, toss it and do it today!
For evidence that Bluesky is a long-term living facility operating as a social media platform...look no further than how their users employ the word "skeet" to refer to "post".
Agreed... the realization I had recently was that if I've got boxes that I haven't touched in years, then I won't really miss them as much as I think I will if I get rid of it.
I had to pull out a VGA cable to connect a screen to my server the other day. The motherboard has IPMI so I hadn't used that cable for years, possibly a decade now. I'll never throw it away.
As an aside, learn to properly care for cables. There are several YouTube videos on this topic, typically from musicians. Most importantly for small molded cables, avoid sharp bends and stress on the wire near the ends. Just a loose coil is much better. And the “over under” method for long cables avoids getting them twisted up.
Hey! It’s not just me! The other day, someone at work decided to throw away a large drawer worth of HDMI, DP, USB cables that I had neatly organized a couple of months ago. This was to make room for like 5 spare power strips that take up <20% of the drawer and while we had like 3 empty drawers in the cabinet. Needless to say, I was livid. Especially because I found out while looking for a USB cable to charge my mouse that we had at least x4 in the drawer.
I see those boxes at estate sales regularly. And on FB marketplace for free or $5. Or sometimes somebody thinks they're sitting on a gold mine of technological history and tries to ask actual money for a box of 20 year old tangles.
Sometimes hoarding stuff pays off. It's usually just hoarding.
It think it's both. The more stuff you have, the more you hoard, and the less you need to pay in terms of time/energy/money to get something you had in the past if you need it now/later, and on the flip side, you can be more minimalist, and will need to spend more time/energy/money to get the things you threw away/gave away/sold if you need them now/later.
It's mostly a resource/constraint time/space/money/effort problem.
If you have children, at least one of them may become fascinated with retro hardware, and play with all of this stuff, reinstalling OS and connecting old drives. Once they grow past that phase, THEN you can bring everything to the e-Waste center :)
1. it is easy to buy a cable and have it delivered to your home in 24 hours
2. You have to be able to remember -where- the box of cables is
3. box of cables takes up space and clutters your environment
1. I always know where my box of cables is, because it’s never moved from its location . 2. It takes up less than two shoeboxes of space, which is hardly anything in my home. 3. If I need the cable right now, I don’t have to wait 24 hours. 4. It costs me nothing to keep them.
I have a transparent plastic box of my own, with cables twist-tied and sorted into labeled zip bags.
The box stays, but cables come and go. I cleared out some PS/2 related cables recently, after not owning any hardware with that port for like a decade now.
Depends on if you reasonably expect to encounter one of those devices again and if the future cabling is backwards compatible.
Using your list I'd likely keep one IDE and comoposite video cable, but toss the RG59 and CAT5 because I could use a current RG6 or CAT6 cable in their place.
Every now and then I look through the cables and take out the ones I no longer have hardware for. We have a cargo-tram every couple of months where you can bring things for disposal that don't go to normal garbage or recycling. Supposedly they recycle the cables but I suspect that means incinerating them (to generate electricity) and collecting the metal after.
do yourself a favour and buy some zip mesh bag on amazon (often used for children's toy sorting; they're much more robust than zip-locks) and use them to group your cables. the big box(es) goes from a source of stress to an absolute delight.
Grouping is also key to de-duplicating IMO. Can be tough to throw away a single cable. But when you have 10 of them grouped together, you know you can safely get rid of them.
IM/FWIW: I personally have found 4mil ziploc-style bags to be pretty close to indestructible. They're like thick evidence locker bags
At some point I need to go through my USB-A-C cables and figures out which ones are actually USB 3. Which only have power and which are USB2... Thankfully I think I have tester that can do that.
I do have a big box 'o cables, though organization is getting difficult. I need some way to organize them into broad categories (USB, audio, power, ethernet, etc).
That's pretty much exactly my organization, instead of a big box I split them into smaller tubs. USB is further divided via labeled bags into USB A->C, USB C, Lightning, and "misc". On top of those I have a R/C car battery/charging tub and a home automation tub.
There are some 3d printer models for building grids of individual cable organizers (https://makerworld.com/en/models/946444-gridfinity-cable-org...) but I have too many cables and my collection is too dynamic to well-utilize something as static as that.
Large 4mil ziploc style bags are extremely durable and are about $0.26 each in bulk on Amazon.
I very much recommend them. As a bonus, you can label them if desired. (Print a label out, or slap some tape on there and write on that, or just stick a sheet of paper inside the bag and write on that)
How on earth do you survive with just one big box of cables? I've got mine sorted into plastic storage boxes with labels, so things like 'Firewire' or 'Monitor' or 'SCSI' can get me to a particular box to sort through. I recently needed a SCSI-2 terminator to connect a CD-ROM drive to a 1990s sampler, and my box came up trumps. It's so pleasing when you find stuff like that...
A few years ago I had to use a pair of high-voltage to low-voltage differential SCSI converters to connect an external DEC TK50 tape drive to my PC, because while I had plenty of HD68-to-HD68 cables, and HD68-to-Centronics cables, and a wide variety of ISA and PCI SCSI HBAs (and probably a couple EISA and Micro Channel boards if I looked hard enough, and I seem to recall finding a VL bus SCSI HBA on a shelf at work a few years ago), the only PCIe SCSI HBAs I have are multichannel cards with VHDCI ports, and the only VHDCI cables I have are VHDCI-to-VHDCI and VHDCI-to-HD68.
10% of my garrage... okay, exxagerating - but at least 0.1% is the big box of cables of who the fuck knows what ... including several firewire, and really old nintendo, and some that I forgot what it was about...
"Why yes I do have E1 twisted pair to E1 coax baluns, and 50 ohm BNC to 75 ohm BNC with matching stubs, and VGA to SCART cables, right here in my big box of cables!" <gestures at shed with bulging walls>
Oh never. I have 2 giant boxes of them. The absolute worst thing ever is when you need something like a USB or HDMI cable, and you're forced to spend like 40 bucks at Best Buy because you're in a pinch.
I still have quite a number of packing cubes with silicone-tie'ed and zip tie'ed cables.
I do want to mention though, a huge amount of cables can be replaced by usb-c cables + an adapter. You don't need a bus to HDMI cable: just get an adapter that has usb-c female, that your cable plugs into, that changes it to HDMI. Ditto for displayport, USB micro, USB b, USB a.
And for power VFLEX has a quite reasonably priced adapter to DC barrel jacks. I still have I dunno 70 power supplies, for laptops, gadgets and whatever. But at this point almost all my devices actually run on high efficiency gan usb-c power supplies. These once again follow the pattern: a usb-c female, then a pigtail (yay, better than fixed, like the HDMI), then the barrel jack.
You're not wrong, but many times I've gone looking for a specific adapter (because I already had a similar cable) and found out that the adapters _usually_ cost as much or more than just buying the cable.
Grouping them is key to deduplicating.
It's easy to look at a single legacy USB A-to-B "printer" cable in isolation and think "I might need this someday!" Because you really might need it someday. However, if you group them you might see that you have ten of them. And then you can get rid of... maybe 8 of them.
I also (mostly) put individual cables into baggies. You can get clear 2mil generic ziploc style baggies for super cheap on Amazon or elsewhere. $15 for 200 or something. Prvents tangles and way less effort than wrapping or tying them.
Pro-tip, use a hole punch on a corner of the bag. That way, once zipped you can just squeeze it to get the air out.
(I also hoard blank CD/DVD jewel cases. Who says technology ruins lives?)
As a bonus, you don't need to raid her hairbands.
I'll second "grouping" with "capability sorting". Get a cable tester and sort your cables by Charge/USB speeds. Even with my default "grouping" of things like "USB-C -> C", "USB-A -> C", etc I still was buying new cables for projects/uses since I wanted to make sure I got exactly the speed/power requirements right. Now all my cables are sorted by capability and that led to more purging and less purchasing since I can go to my cable bins and grab exactly what I need.
I think I hardly have any pairs of cables that are similar enough to be interchangeable, and at this point most of them are USB-C, so they'd all mostly end up in the same bag if that's the criterion.
My USB-C charging cables are all 3' or longer, so they're visually distinct from the crappy little cables that come for free inside the package for various budget-priced gizmos.
My Thunderbolt/USB4 cables are labeled as such, and I am very confused that you are talking about Thunderbolt/USB4 cables so stiff that they cannot bend to fit into a container or bag.... I mean, mine are stiff but not that stiff. Plus these are expensive cables. Not sure I have any spares. Those are bought for purpose.
Charging is an interesting case, I actually deliberately use crappy cables for that too, depending on the charging time I need!
Re: stiffness: I mean I guess it depends, how big is your bag. I'm thinking like a freezer bag not a grocery bag. I could bend them to fit but then I'd probably mess them up.
I didn’t get into my organizational techniques, but agree with your take! Ziploc bags + a sharpie is exactly how I do it.
https://imgur.com/JMUIcDY
Ziptie once coiled, attach label for what format / length.
Bag cables with the same connectors. If you have more than fit in a gallon ziploc you should probably reduce them.
Bonus if you hang them on a pegboard so you can see them with big clear labels on each bag.
Edit: and shrinkwrapped labels on each end (e.g. 12345-USBC-2m) for double bonus points so that you never have to trace a cable to find the other end.
Please god, no more zip ties. Use double sided Velcro strap. You can buy it in a roll and cut to length. Reuse it all you want. Join multiple shorter lengths to make a longer one. Just please don't make me cut another god damn zip tie off a bundled cord. I deal with enough zip tie bondage fetishists at work.
For example, I have a variety of USB C to USB C cables but they each have their own capabilities. Some support high transfer speeds, so I keep them around for connecting SSDs, while others are just USB 2 speeds so they are strictly for charging.
Another case is I have a very specific USB C to USB C cable that looks incredibly generic, but it is for connecting a screen tablet to a laptop because the manufacturer decided to make the port recessed, so only their cable fits. If this cable wasn't labeled as for a specific device, I would have donated it years ago.
It is some effort, for those who don't like to tinker with tech I can understand why they just shove them all into a box in the back of their closet. But I find that culling my cables at least makes me aware of what I have and don't have.
One other suggestion I have is just buying a longer cable than you think you need because eventually you'll have the need for it anyway. I have so many 3.5mm aux cables because I kept changing my desk set up and needing to buy longer and longer cables. If I had just bought the longest cable I could have at the time I would have saved myself some headache.
Another tip is adapters. Sometimes it's easier to just have cables of one type and a bunch of adapters for when you need them rather than having a ton of different cables for each possible scenario. I used to have a mix of RCA and 3.5mm cables but never had the right combination of what I needed at the time. Eventually I caved in and just bought a ton of adapters so I could standardize all the cables and use adapters as needed. Same with USB C cables.
This only works with cables that bend easily. For something stiff/sensitive like high speed USB4 I found it more problematic than helpful.
Do you mean micro-USB-B? Full size (and mini) USB-B cables (comparatively) built like tanks.
Even though it's annoying, I understand the design tradeoff. You definitely would rather your (replaceable) cable get damaged than the port it's plugged into.
USB-A to micro-B cables, and the connection is tetchy beyond belief about which ones it will accept and which it won't, either with or without the theoretically-unnecessary-for-this-printer power wire blocker. I can see no rhyme or reason to it but now I have a cable that has a dot painted on it...
> transparent plastic box
> Banker's Boxes
Do not do this. All plastic baggies, storage tubs, and grocery bags, are going to build up with static electricity. While it may seem totally fine to drop inert cables into a plastic bag, eventually you'll come up against a USB stick, or an SSD or SDRAM, or something, and that ESD damage will not be a pleasant customer experience.
Go here: https://silicagelpackets.com/aluminized-and-clear-moisture-b...
I picked up some resealable, aluminized bags and they've lasted for years. I also purchased fistfuls of silica gel packets, and I toss one into each bag when I seal it up.
I'm not sure if organizing "by cable type" would make sense to me, when there are adapters and dongles involved. Some of these baggies have been labeled by the central device, e.g. "All ThinkPad accessories are in here".
Also, for cable organizing, I've ordered rolls of plain Velcro strips: https://www.amazon.com/VELCRO-Brand-VEL-30765-AMS-Self-Gripp...
You can just cut these to the desired length and wrap them around your cables, for routing or bundling. They are, of course, reusable. I cut little notches in them so that they stay locked to each cable. You could get them in rainbow colors, but I like the white rolls so that I can write on them with a Sharpie.
Keep in mind that not everything stores optimally at very low humidity.
I was surprised to learn (from a recent thread here) that books will degrade more quickly if they are kept completely dry.
I used to just have a generic big tub with all the generic cables and wires. Some were nicely wrapped up, others often got themselves into a giant tangled mess. I could never find anything. I got a bunch of small/medium sized plastic bins with lids for all the generic stuff. An old labeler quickly made them "USB cables", "A/V Cables", "DC Power Adapters", "AC Power Cables", "Coax Cables"...now it takes me two seconds to find any particular random cable.
My first thought was "awesome, what project can I start that uses ten of those cables?"
I didn't know this; I had foolishly assumed that SATA power connectors were standardized on both ends.
(I'm rarely smart and have a second big box of modular PSU cables that I maybe ought to get rid of.)
I picked out a random short ethernet cable that looked nice (it was flat) to connect my wifi AP to my router.
It took me about a month to realize my 100mbit internet connection had dropped down to about ~85-90mbit, but more importantly, transferring files between a wifi client and the wired network was also only ~90mbit.
Turned out the cable was so bad that it only connected at 100mbit...
I have now gone the other way and I actually curate the BBOC: All cables I get for 'free' with random appliances now go straight to the bin (unless they are specialised) and I only keep cables I specifically bought and know they adhere to a standard.
They're standardized on the device side, but not the PSU side. So always check pinout before you make the very reasonable assumption that if it fits it works
Especially if the "manufacturer" is just a reseller.
It's seriously annoying that this is the case though. Unless you kept the cables in the original package or in a labelled container, you cannot safely use them again if you owned more than one modular PSU.
On the bright side, the actual replacements that eventually got to me were both 2TB bigger than the originals. They didn't tell me about this, so I'm not sure if they silently upgraded me to apologize for the wait, it was an accident, or they happened to be out of stock and just grabbed the next size up.
6 pin EPS and 6 pin PCIe power cables are not the same. Even though the connector may fit they are not the same pinout.
I tossed them in the garbage with a ton of other use less cables. I kept one HDMI cable (not 8) and a few odds and ends. I kept one rj45 Ethernet cable and tossed the rest. I even tossed my rj45 crimping tool kit. Why? Because I don't see the need to crimp Ethernet cables anytime soon and should the need arise I can buy a kit for $30.
So at the end my cable box when from being overflowing to half full.
Onto the next project.
We've been unspooling the stash of wood off-cuts, bits of copper pipe, and misc. broken or trash-picked parts from my late grandfather's workshop for the last few years. He always seemed to have materials at-hand to fix anything and, as a kid, I was in awe of that. Now I understand why.
I hope I can leave less stuff for my daughter to poke thru, but at the same time I want to be like my grandfather, seemingly being able to fix anything immediately.
What you've got to do is become more forgetful.
Ask not what a 17v power supply can do for your friends. Ask if you'll remember it and find it when that moment comes.
Things like big, thick composite cables and extra long VGA cables.
Now… maybe not?
I've got "USB", "AV" and "Networking & PC Accessories", which obviously has enormous overlap, but equally divides the cables I have pretty nicely.
Mine is similar but I split audio and video since I have a lot of audio-specific stuff. "Video" only has the various monitor cable standards going back 20-odd years.
"USB cables, standard"
"USB passive/special, except pigtails and USB->AV"
"AV, including USB-AV cables"
My categories are identical to yours. Home Depot had a sale on these stackable dewalt boxes that are much more cost effective for semi-junk stuff than Milwaukee pack outs.
You need at least 4. And another one for power supplies.
I use cables from it once every few years.
I have much yet to learn, cable master :)
My D2A converter I use to route TV audio to a small amplifier died. It was cheap, but decent. I wanted another cheap one. I had trouble finding any. Finally, I snagged a pair on Amazon/eBay, but it used ancient USB connections. Luckily, I had old USB cables, so I'm good. But what will I do if the USB cable stops working?
Also that weird, really small USB connector that was found on some early digital cameras. I think Kodak was a big user of it. Sorta looked like a narrower and taller version of the Mini-B. Maybe the Mini-AB but that doesn't look like it. I have one in my box at home.
I wish that happened a lot less as I have entirely too many old cables.
Getting rid of almost 10 different proprietary charging cables for pre-smart phones and some old laptops felt great though :P
https://electronics.stackexchange.com/a/444287
Decades ago, I purchased a usb external hard drive case with a usb-a for the connection to the computer. Returned that pretty quick because eww.
Point is, use clear bags so you can see inside, and Hefty makes the slider version. I get the gallon and half gallon bags for this, and then the quart size as well. This is the Marie Kondo technique and it's amazing for keeping all these cables which are always coming in handy!
I keep the duplicates, because you never know which color and length is going to be the perfect fit for the current need!
One for every-day cables (like USB C), one for the stranger cables (like USB-B 3), and one for the one-offs (like a Nintendo DS cable).
It's the easiest to actually keep organized and it's easy to find what I need.
The other day I was fabberglased I could not find an HDMI to HDMI cable! HDMI > DVI yes, to VGA yes, to display port yes, to mini-HDMI yes. it was so shameful, for me having to go to amazon/best buy to purchase an HDMI cable is the lowest of the low.
My dad passed a few years back, this past year I spent a considerable amount of time helping my mom and sister tame all his junk. So much junk was tossed or donated, very little was kept and even less sold. Not wanting to burden my family with all of my junk I started working on my own hoard this summer. Letting go wasn't easy, but once it was done I felt less burdened by it.
And yes like clockwork a week after tossing it all I needed some random cable. I spent a couple of bucks for one at Walmart of all places, but Amazon and ebay would have had my back if that cable hadn't been there.
If you have a similar junk box, you have my permission to just throw it away. Don't look in it, don't worry about it, just toss it. You do not need to be carrying so much junk. You do not need 20 year old ethernet cables, 30 year old scsi and ide cables, or 40 year old audio cables. You can buy new ones, in new condition today, most of which are reasonably priced and wont produce random errors or noise due to internal faults.
tl;dr- You don't need it, toss it and do it today!
https://www.youtube.com/watch?v=C6wZUV1t1y0
That doesn't mean I don't also have my big box of cables, but just offering an alternate strategy.
I need help.
That box that you move every time you move house without opening it.
Thank you for listening.
I put those in another box, seal it completely, and write a message on the outside along the lines of "presumed useless - Sep 2016".
If I come across that box in, say, September 2026, I feel entirely comfortable tossing the whole thing.
Sometimes hoarding stuff pays off. It's usually just hoarding.
It's mostly a resource/constraint time/space/money/effort problem.
Bag the groups of cables by type and then put them in pencils bags and skip the untangling the next time you have to go hunt for one.
Throw out the box of cables.
* for now, in certain locations, from certain retailers
The box stays, but cables come and go. I cleared out some PS/2 related cables recently, after not owning any hardware with that port for like a decade now.
Using your list I'd likely keep one IDE and comoposite video cable, but toss the RG59 and CAT5 because I could use a current RG6 or CAT6 cable in their place.
IM/FWIW: I personally have found 4mil ziploc-style bags to be pretty close to indestructible. They're like thick evidence locker bags
There are some 3d printer models for building grids of individual cable organizers (https://makerworld.com/en/models/946444-gridfinity-cable-org...) but I have too many cables and my collection is too dynamic to well-utilize something as static as that.
I very much recommend them. As a bonus, you can label them if desired. (Print a label out, or slap some tape on there and write on that, or just stick a sheet of paper inside the bag and write on that)
I need to get this under control.
I do want to mention though, a huge amount of cables can be replaced by usb-c cables + an adapter. You don't need a bus to HDMI cable: just get an adapter that has usb-c female, that your cable plugs into, that changes it to HDMI. Ditto for displayport, USB micro, USB b, USB a.
And for power VFLEX has a quite reasonably priced adapter to DC barrel jacks. I still have I dunno 70 power supplies, for laptops, gadgets and whatever. But at this point almost all my devices actually run on high efficiency gan usb-c power supplies. These once again follow the pattern: a usb-c female, then a pigtail (yay, better than fixed, like the HDMI), then the barrel jack.
And now you have a bunch of boxes with adapters ;P