I acquired a used Rigol which has the i2c decoder disabled. I tried to contact them for a quote on a license for the decoders but Rigol North America would not respond.
I’m looking forward to software that makes it a decent tool that it should have been!
Hey - derail, and maybe not helpful to you but ... Have you considered a Logic Analyzer I stead for this? $10 for the Chinese ones, can use the Selae software (same chip), and I found it more convenient than using the Rigol. I use the Rigol for analog, but never found it convenient for digital.
This is a really impressive piece of work, a scope isn't just a generic SBC with an ADC attached, it's a huge amount of fully custom analog and digital circuitry that you need to work with, combined with extensive signal processing software requirements, UI code, and so on. Julian (with some AI help) has essentially replicated what an entire dev team at Rigol did over quite a long period of time, it's actually worth getting a Rigol over other similar brands just for this.
At least from the eevblog post, it seems like the only re-implemented part is the "host" side, so Linux. A scope also has an FPGA, which is where the signal processing, sample memory, and acquisition happens. This one is much harder to reverse engineer, because it's effectively impossible to decompile the bitstream back to code (verilog), it's not possible to debug it in any meaningful way, so you're really starting from scratch in the dark.
And it's extra hard, because you need to know what's connected to which pin on the FPGA, which is impossible to do without desoldering it or destroying the board.
If he can get a black-box spec for what the FPGA's supposed to do, he can write a cleanroom implementation (or perhaps even add features), or rebuild the whole thing, including what the FPGA actually does and how.
I don't know what FPGA is in these (edit: it's Xilinx), but the usual problem is that toolchains tend to be highly proprietary.
Well, the github repository makes it look like much more was accomplished: Linux on the host was actually already done by someone else, he (and his AI agent) apparently reverse-engineered the custom application of Rigol which controls the FPGA (I suppose he left the FPGA configuration file alone) and is able to perform measurements.
I’m looking forward to software that makes it a decent tool that it should have been!
Ob-direct link to the repo: https://github.com/deckerjulian/oos
I don't know what FPGA is in these (edit: it's Xilinx), but the usual problem is that toolchains tend to be highly proprietary.